Engine / Clutch

Engine / Clutch
Altopelhilfe Artikelbild
SOLD OUT
High Performance Fan Blade CIH
7-blade high-performance fan wheel / wind vane from new production, suitable for all OPEL CIH engines 1.5 - 2.8, for all vehicles with a fixed fan (NOT for viscous fans). The fan wheel is fastened here with 4 screws, NOT with a central screw or nut.
Price per piece.
PLEASE READ the following instructions:
- This fan wheel is suitable for OPEL CIH engines 1.5 - 2.8, for all vehicles with a fixed fan (NOT for viscous fans). The fan wheel is fastened here with 4 screws, NOT with a central screw or nut.
ONLY for CIH engines , NOT suitable for Diesel + OHC engines + OHV engines and models with power steering.
>> Diameter approx. 350mm , central bore to water pump approx. 24mm <<

On 6-cylinder models, the plastic frame on the radiator may have to be cut out slightly.

If the generator-tensioner from the 6-cylinder is used on the 4-cylinder, although original is always preached, then this fan wheel does not fit!!!
39,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Hose Grommet Ventilation Valve Cover
Hose Grommet Ventilation Valve Cover, fits to all Kadett A + B+ C 1,0 - 1,2 and Manta / Ascona A+B 1,2 (for Kadett A you must close the extra hose )
16,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Hydraulic Tappet CIH 1,5 - 3,0

Hydraulic Tappet for alle CIH 1,5 - 3,0 engines.
Price is for one piece.
We sell these tappets since 2008 and sold a few thousand pieces.
Complaint quote 0,14%...
We have them without any problems in several own cars.
Please let the adjustment work be done in a specialist workshop !!!
We do not offer tappets from Ajusa !!

16,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Inlet Manifold Screw set OHV 1,0 - 1,2
Screw set with washers for inlet manifold on Cylinder-Head for all models 1,0 + 1,1 + 1,2 in Kadett ABC, Manta AB, Ascona AB.
Price is for one set for one engine as pictured.
2,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Inlet valve Guide CIH 1965 up
Inlet Valve in standard size , fits to Kapitän/Admiral A 2,8  , K.A.D B 2,8S + H up to engine 50000 , 2,8E up to 30000 , Commdoore A 2,8H up to  14052 , Commodore A 2,5 all models  ! 1,7N up to enginge-No. 212681 , 1,7S up to 570958 , 1,9S up to 731509  , 1,9SH up to 12968 , 1,6S up to  230805 , 1,6N up to 26200 .
Price is for one piece , only while stock last
11,90 EUR
incl. 19% tax excl. Shipping costs
Pieces:
 
Nut for Rocker CIH
Nut for Rocker CIH
Nut for Rocker to adjust the Valve position from newest 2020-production, fits to all CIH-Engines 1,5 - 3,0.
This hiqh-quality rocker-nuts with wrench-size 15 can be used in:
- Rekord B/C/D/E 1,5/1,7/1,9/2,0/2,2
- Kadett B/C 1,5/1,6/1,7/1,9/2,0
- Manta A/B 1,6/1,9/2,0/2,2
- Ascona A/B 1,6/1,9/2,0
- Commodore A/B/C 2,5/2,8
- Kapitaen/Admiral/Diplomat A/B 2,8
- Senator/Monza A 2,0/2,2/2,5/2,8/3,0 (not C30SE)
Price is for one piece.

These nuts are burnished and oiled
8,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
O-Ring Seal under Carburator
O-Ring between intake manifold and carburator ,fits to all Kadett A ,Kadett B/Olympia A 1,1 + 1,2 ,Kadett C 1,0 + 1,2 ,Ascona / Manta A 1,2 .
Price is for one piece
2,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Dip Stick Guide Tube CIH "Special"
This special dipstick guide tube fits CIH motors with rear sump.
The tube mounts in the 13mm hole in the block to guide the dipstick into the deep end of the oil pan keeping it away from the crankshaft.
It also fits on the outside of the Aluminum oil pans where the dipstick comes out near the starter motor.
The tube allows easier access to the dipstick due to the tight area near the starter.
Price is for one piece.
14,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Filter all models OHV + CIH 1,0 - 2,2
High-quality oil filter from new production, suitable for all 4-cylinder engines from 1958-1980, suitable for all models 1.0 - 2.2 OHV + CIH, as follows:
- Kadett A + B + C, all models
- Ascona A + B, all EXCEPT diesel
- Manta A + B, all except 1.3 + 1.8
- Rekord B 4-cylinder
- Rekord C, all
- Rekord D, all except diesel
- Rekord E, all except diesel
- Monza / Senator A 2.0
- GT, all
Price per piece
4,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Filter all models OHV + CIH 1,0 - 2,2, Mahle OC21
Mahle OC-21 oil filter, suitable for all 4-cylinder engines from 1958-1980, suitable for all models 1.0 - 2.2 OHV + CIH, as follows:
- Kadett A + B + C, all models
- Ascona A + B, all EXCEPT diesel
- Manta A + B, all except 1.3 + 1.8
- Rekord B 4-cylinder
- Rekord C, all
- Rekord D, all except diesel
- Rekord E, all except diesel
- Monza / Senator A 2.0
- GT, all
Price per piece
5,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Filter Mounting Kadett B/C, Ascona/Manta 1,0 - 1,2
ORIGINAL oil filter block, suitable for the following models:
- Kadett B 1,1 + 1,2
- Kadett C 1.0 + 1.2
- Ascona / Manta A 1,2
- Ascona / Manta B 1,2
Price per piece, only while stocks last
41,65 EUR
incl. 19% tax excl. Shipping costs
Oil Pressure Switch 1,0 - 3,0
Oil Pressure Switch 1,0 - 3,0
Oil Pressure Switch, fits to all models Rekord BCDE, Kadett ABC, Commodore ABC, K.A.D. A 2,8, K.A.D. B 2,8, Manta AB, Ascona AB, Monza/Senator A. NOT for models with extra armatures!
9,00 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Pressure Switch for Extra Instruments
Oil pressure switch with 2 connections from new production, thread M14x1,5mm * , for vehicles with additional instruments:

Suitable for the following models:

- Kadett B 1,1 - 1,9, with threaded connection M14x1,5mm
- Kadett C 1,0 - 2,0E, with threaded connection M14x1,5mm
- Rekord B 1,5 - 1,9 , with threaded connection M14x1,5mm
- Rekord C 1,5 - 2,2,with threaded connection M14x1,5mm
- Rekord D 1,7 - 2,0 with threaded connection M14x1,5mm
- Rekord E 1,7 - 2,2 with threaded connection M14x1,5mm
- Commodore 2,5 - 2,8, with threaded connection M14x1,5mm
- Commodore B 2,5 + 2,8, with threaded connection M14x1,5mm
- Commodore C 2,5, with thread-connection M14x1,5mm
- Ascona / Manta A 1,6 - 1,9, with thread-connection M14x1,5mm
- Ascona / Manta B 1,6 - 2,4, with threaded connection M14x1,5mm
- Kapitaen-Admiral A ONLY 2,8, with thread-connection M14x1,5mm
- Kapitaen-Admiral-Diplomat B 2,8, with threaded connection M14x1,5mm
- Monza A 2,0 - 3,0, with threaded connection M14x1,5mm
- Senator A 2,0 - 3,0, with threaded connection M14x1,5mm
Price per piece
* if you are not sure, please check the existing thread in the engine block BEFORE buying.
69,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
NEW
Oil Pump OHV 1,0 - 1,2 1962-79
*New Old Stock* Oil pump, suitable for the following models:
- Kadett A
- Kadett B 1.1 + 1.2
- Kadett C 1.0 + 1.2
- Ascona / Manta A 1.2
- Ascona / Manta B 1.2
- GT 1100
Price per piece, only while stocks last.
892,50 EUR
incl. 19% tax excl. Shipping costs
Oil seal Crankshaft Rear CIH 1,5 - 2,0
Oil seal Crankshaft Rear CIH 1,5 - 2,0
´Made-in-Germany- Oil Seal for crankshaft rear ,tits to all CIH-engines 1,5 - 3,0 .See list of cars in tab .
Price is for one piece .
 
20,00 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Seal for Crankshaft Rear 1,0 - 1,2 OHV, BGA
Oil Seal for Crankshaft Rear, fits to Kadett A/B/C 1,0 + 1,1 + 1,2, Ascona/Manta A+B 1,2 , GT 1100.
Top Quality from BGA. 
Price is for one piece.
14,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Seal for Crankshaft Rear 1,0 - 1,2 OHV, Reinz
Reinz Oil Seal for Crankshaft Rear, fits to Kadett A/B/C 1,0 + 1,1 + 1,2, Ascona/Manta A+B 1,2 , GT 1100.
Premium Quality from Reinz.
Price is for one piece.
19,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Seal for Steering Housing front OHV
Oil Seal for Steering Housing front all 1,0 + 1,1 + 1,2
2,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Seal for Valve Shaft 1,5 - 2,8
Oel Seal on Valve Shaft
0,60 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Seal Steering Housing CIH
Oil seal for steering housing / crankshaft front from new production from Reinz. Fits to all CIH-engine 1,5 - 3,0.
Price is for one piece.
12,00 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Outlet valve Guide CIH 1965 up
Guide for exhaust valve, suitable for all CIH engines 1.5 - 3.0 from 1965-1984.
Dimensions: 12.75x9.0x67mm.
Price per piece
11,90 EUR
incl. 19% tax excl. Shipping costs
Pieces:
 
Altopelhilfe Artikelbild
Pair of Screws Cylinder-Head to Steering Housing
Pair of Screws from Cylinder-Head into steering housing , for all engines 1,7 - 3,0 later chassis-No. (later 1972) . Price is for one pair
2,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Pedal Pad Clutch/Brake Kadett B + C, Opel GT
Rubber Pad for brake/clutch pedal from new production, fits to all models Kadett B + C and Opel GT.
Only for models with manual gearbox.
Price is for one piece
5,00 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Piston Ring Set 1,2 (Standard)
Piston ring set ( standard iussue ) 1,2 , fits to Kadett B+C , Ascona/Manta A+B.
Price is for one set for one piston.
Please ask for oversize rings.
19,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Piston Ring Set 1,9 CIH (Standard)
Piston ring set ( standard iussue ) for one piston 1,9 CIH , fits to Kadett B+C , Rekord C+D+E , Ascona / Manta A+B , Olympia A.
Price is for one setas pictured  for one piston.
Please ask for oversize rings
22,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Piston Ring Set 2,0 CIH (Standard)
Piston ring set (standard issue) 2,0 CIH, fits to Kadett C , Rekord D+E , Ascona / Manta B , Senator / Monza A.
Price is for one set for one piston.
Please ask for oversize rings
35,70 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Plate for Valve Spring several CIH
Plate for valve spring, suitable for the following models:
- Rekord C
- Rekord D
- Commodore A
- Commodore B
- Kapitaen / Admiral A 2.8
- Kapitaen / Admiral / Diplomat B 2.8
- Kadett B - 1.5 - 1.9
- Olympia A 1.5 - 1.9
- Kadett C 1.6 - 2.0
- Ascona A 1.6 - 1.9
- Manta A 1.6 - 1.9
- Ascona B 1.6 - 2.0
- Manta B 1.6 - 2.0 (exhaust only)
- Monza / Senator 2.0 E ( exhaust only )
- Monza / Senator up to engine no. 28 H - 102080 (exhaust only)
- Monza / Senator up to engine no. 30 H - 8631 ( exhaust only )
- Monza / Senator up to engine no. 30E - 31333 ( exhaust only )
Price per piece, only while stocks last.
2,75 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Pressure Bearing CIH 1,5 - 3,0
Pressure Bearing for all models CIH 1,5 / 1,6 / 1,7 / 1,9 / 2,0 / 2,2 / 2,5 / 2,8 / 3,0 KAD A/B, Rekord B/C/D/E, Kadett B/C , Commodore A/B/C, Monza / Senator A. New production!
21,90 EUR
incl. 19% tax excl. Shipping costs
Pressure Bearing CIH 1,5 - 3,0 PREMIUM
Pressure Bearing CIH 1,5 - 3,0 PREMIUM

Premium Pressure Bearing from new production , in metall version like original , fits for all models CIH 1,5 / 1,6 / 1,7 / 1,9 / 2,0 / 2,2 / 2,5 / 2,8 / 3,0 KAD A/B, Rekord B/C/D/E, Kadett B/C , Commodore A/B/C, Monza / Senator A .
Price is for one piece

39,95 EUR
incl. 19% tax excl. Shipping costs
Pressure Bearing Guide 1962-79, OHV
Pressure Bearing Guide 1962-79, OHV
Original Pressure Bearing guide for the following models:
- Kadett A
- Kadett B 1,1 + 1,2
- Kadett C 1,0 + 1,2
- Ascona A/B 1,2
- Manta A/B 1,2
- GT 1100
Price is for one piece ,only while stock last
31,60 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Pulley on Water Pump CIH 1,5 - 2,8, with fixed fan
ALUMINIUM pulley from new production for the standard CIH water pump, suitable for the following models with water pump with fixed fan.
- Rekord B 1.5 - 1.9
- Rekord C 1.5 - 2.2
- Rekord D 1.7-2.0N/S
- Rekord E 1.7-2.0N/S
- Kadett B 1.5 - 1.9
- Kadett C 1.6S
- Ascona / Manta 1.6 + 1.9S
- Ascona / Manta B 1.6 - 2.0N/S
- GT 1900
The pulley can generally be used on all models that have our 1334035 water pump installed or where the fixed fan is fastened with 4 M8 screws.
Price per piece
69,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Rubber Boot Clutch Release Fork CIH 4-Gear Box
Rubber Boot Clutch Release Fork all models CIH 1,5 - 2,8 with 4-gear box in Rekord BCDE, Commodore ABC, Ascona AB, Manta AB, Kadett BC, Kapitaen/Admiral/Diplomat AB, Monza/Senator A
11,90 EUR
incl. 19% tax excl. Shipping costs
97 to 128 (from a total of 156)