Main page » Kadett B / Olympia A » Cooler / Heater

Cooler / Heater

Cap for Cooler

Cap for the cooler, fits to all models BESIDE Diplomat V8.

11,90 EUR

incl. 19% tax excl. Shipping costs

CIH-Water Pump Screws set

Set of screws for water pump, complete with washers, fits to all models CIH 1,5 - 2,8, price is for one set

5,95 EUR

incl. 19% tax excl. Shipping costs

Clamp for Heater Control Cable Kadett B

Clamp for Heater Control Cable Kadett B .
Price is for one piece

4,95 EUR

incl. 19% tax excl. Shipping costs

Cooler Cleaner

250ml bottle cooler cleaner

11,95 EUR

incl. 19% tax excl. Shipping costs

Cooling Thermostat CIH 1,5-3,0 ´Carburator` 1957 up

Cooling thermostat from new production, opens at 88 degrees Celsius, fits all carburator-engines 1,5 - 3,0 and Rekord PI, PII, Kapitaen P.
Does NOT fit to injection-models, Diesel and all models with air condition.
Price is for one set incl the pictured gaskets.

15,90 EUR

incl. 19% tax excl. Shipping costs

Cooling Thermostat Installation Kit, " three Screws"

Coolant thermostat installation kit, opening start 88° Celsius, suitable for all CIH carburetor engines 1.5 - 3.0.
PLEASE NOTE: This version is for models where the thermostat housing is attached to the cylinder head with THREE screws!
NOT suitable for injection, diesel and all models with air conditioning.
Price per set incl. the gaskets shown.

17,95 EUR

incl. 19% tax excl. Shipping costs

Cooling Thermostat Installation Kit, " two Screws"

Coolant thermostat installation kit, opening start 88° Celsius, suitable for all CIH carburetor engines 1.5 - 3.0.
PLEASE NOTE: This version is for models where the thermostat housing is attached to the cylinder head with TWO screws!
NOT suitable for injection, diesel and all models with air conditioning.
Price per set incl. the gaskets shown.

17,95 EUR

incl. 19% tax excl. Shipping costs

Fanbelt 10 x 900mm

High Quality Fanbelt 10x900mm, can be used in the following models:
- Rekord B 1,5 - 1,9 with AC-generator
- Rekord C 1,5 - 2,2 with AC-generator
- Commodore A 2,2 - 2,8 without Servo
- Rekord D beside Diesel
- Commodore B 2,5 + 2,8
- Rekord E beside Diesel
- Commodore C , Kadett A
- Kadett B 1,1 + 1,2 with DC-generator
- Kadett B 1,5 - 1,9
- Kadett C 1,0 + 1,2
- Ascona / Manta A 1,6 + 1,9
- Ascona / Manta B 1,6 - 2,0 N+S
- Kapitaen-Admiral-Diplomat B 2,8
Price is for one piece

6,90 EUR

incl. 19% tax excl. Shipping costs

Fanbelt 10 x 950mm

High quality fanbelt from new production, fits for the following models:
- Kadett B 1,1 + 1,2 ONLY WITH D/C - GENERATOR
- Kadett C 1,0 + 1,2
- Ascona / Manta A 1,2
- Ascona / Manta B 1,2.
Price is for one piece

7,95 EUR

incl. 19% tax excl. Shipping costs

Frost Protection Fluid , 1500ml

1500ml Frost Protection Fluid (blue).
Price is for one 1500ml-Bottle.

7,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Thermostat Housing Cover CIH 1,5 - 3,0

Gasket Thermostat Housing Cover CIH 1,5 - 3,0 beside Injection

1,50 EUR

incl. 19% tax excl. Shipping costs

Gasket Thermostat-Housing CIH

Gasket for thermostat housing to Cylinderhead for CIH 1,5 - 2,8 with Carburator-Engine and two screws .
Price is for one piece .

2,00 EUR

incl. 19% tax excl. Shipping costs

Gasket Thermostat-Housing CIH THREE screws

Gasket for thermostat housing to Cylinderhead for CIH 1,5 - 2,8 with Carburator-Engine and three screws .
Price is for one piece .

2,00 EUR

incl. 19% tax excl. Shipping costs

Gasket Water Pump CIH 1,5 - 3,0

High quality gasket for Water pump all CIH 1,5 - 3,0 .
Price is for one piece .

5,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Water Pump OHV 1,0 - 1,2

Gasket for Water pump all models OHV 1,0 + 1,1 + 1,2, always use a little sealing material

1,50 EUR

incl. 19% tax excl. Shipping costs

Heater Hose per metre

Exclusive for us produced water hose for heater, can be used in all models.
Of course the hose has a fabric lining.
Inner dieamtre ca. 15mm, outer ca. 22mm.
Price is for one metre

9,95 EUR

incl. 19% tax excl. Shipping costs

Heater Valve

Heater valve from new production for all models Kadett B + Opel GT .
With adaption work it can be used for Kapitaen-Admiral-Diplomat B ,Ascona A ,Manta A ,Rekord C ,Commodore A .
Price is for one piece .

59,95 EUR

incl. 19% tax excl. Shipping costs

Heater Valve Kadett B , EARLY

*New Old Stock* - heater valve for all Kadett B up to Chassis-No. 1234067.
Price is for one piece, only while stock last.
The valves may show bearing marks on the brackets, but these can be easily removed.

95,20 EUR

incl. 19% tax excl. Shipping costs

Heater Valve Kadett B Rallye

*New Old Stock" heating valve for Kadett B Rallye.
Price per piece, only while stocks last.
Some of the valves may show signs of storage wear on the brackets.

95,20 EUR

incl. 19% tax excl. Shipping costs

High Performance Fan Blade CIH

SOLD OUT : ACTUALLY NO NEW DELIVERY DATE !!!

7-blade high-performance fan wheel / wind vane from new production, suitable for all OPEL CIH engines 1.5 - 2.8, for all vehicles with a fixed fan (NOT for viscous fans). The fan wheel is fastened here with 4 screws, NOT with a central screw or nut.
Price per piece.
PLEASE READ the following instructions:
- This fan wheel is suitable for OPEL CIH engines 1.5 - 2.8, for all vehicles with a fixed fan (NOT for viscous fans). The fan wheel is fastened here with 4 screws, NOT with a central screw or nut.
ONLY for CIH engines , NOT suitable for Diesel + OHC engines + OHV engines and models with power steering.
>> Diameter approx. 350mm , central bore to water pump approx. 24mm <<

On 6-cylinder models, the plastic frame on the radiator may have to be cut out slightly.

If the generator-tensioner from the 6-cylinder is used on the 4-cylinder, although original is always preached, then this fan wheel does not fit!!!

39,95 EUR

incl. 19% tax excl. Shipping costs

Operating Device Heater / Ventilation Kadett B, later Chassis-No

Operating Device Heater / Ventilation, fits for Kadett B Sedan / Caravan later than Chassis-No.1234068.
Price is for one piece, only while stock last.

35,70 EUR

incl. 19% tax excl. Shipping costs

Operating Device Heater / Ventilation Kadett B, later Chassis-No, WITHOUT cigar lighter

ORIGINAL Operating Device Heater / Ventilation WITHOUT cigar lighter, fits for Kadett B Sedan / Caravan later than Chassis-No.1234068.
Price is for one piece, only while stock last.

35,70 EUR

incl. 19% tax excl. Shipping costs

Pulley on Water Pump CIH 1,5 - 2,8, with fixed fan

ALUMINIUM pulley from new production for the standard CIH water pump, suitable for the following models with water pump with fixed fan.
- Rekord B 1.5 - 1.9
- Rekord C 1.5 - 2.2
- Rekord D 1.7-2.0N/S
- Rekord E 1.7-2.0N/S
- Kadett B 1.5 - 1.9
- Kadett C 1.6S
- Ascona / Manta 1.6 + 1.9S
- Ascona / Manta B 1.6 - 2.0N/S
- GT 1900
The pulley can generally be used on all models that have our 1334035 water pump installed or where the fixed fan is fastened with 4 M8 screws.
Price per piece

69,95 EUR

incl. 19% tax excl. Shipping costs

Radiator Fan Motor Kadett B

Radiator fan motor for all models Kadett B beside US-Version.
For early models up to Chassis-No. 1234067 only mount yellow + brown cable.
Price is for one piece, only while stock last

147,20 EUR

incl. 19% tax excl. Shipping costs

Remote Reading Thermometer Kadett B, MotoMeter

Remote Reading Thermometer MotoMeter, fits for Kadett B + Olympia A.
Price is for one piece, only while stock last

45,20 EUR

incl. 19% tax excl. Shipping costs

Rubber Bumper side

Rubber bumper side for cooler, fits to Kadett A + B + C, Olympia A, Manta /Ascona A + B, Rekord A + B + C + D, Commodore A + B, Kapitaen/Admiral/Diplomat A + B.
Price is for one piece.

4,90 EUR

incl. 19% tax excl. Shipping costs

Pieces:

Rubber Seal under Thermostat CIH 1,7 - 2,8

Rubber seak under thermostat all CIH 1,7 - 2,8

2,00 EUR

incl. 19% tax excl. Shipping costs

Screw Set Pulley on Water Pump CIH 1,5 - 2,8, with fixed fan

Screw set / fastening set for belt pulley on standard CIH water pump, suitable for the following models with water pump with fixed fan.
- Rekord B 1.5 - 1.9
- Rekord C 1.5 - 2.2
- Rekord D 1.7-2.0N/S
- Rekord E 1.7-2.0N/S
- Kadett B 1.5 - 1.9
- Kadett C 1.6S
- Ascona / Manta 1.6 + 1.9S
- Ascona / Manta B 1.6 - 2.0N/S
- GT 1900
The pulley screw set can be used on all models that have our 1334035 water pump installed or where the fixed fan is fastened with 4 M8 screws.
Price per set as shown.

2,95 EUR

incl. 19% tax excl. Shipping costs

Switch for Blower Kadett B later Chassis-No.

2-Steps-Switch for blower , fits to all Kadett B later than Chassis-No 1234068 .
Price is for one piece, only while stock last

33,20 EUR

incl. 19% tax excl. Shipping costs

Switch Panel with Switch for Blower Motor Kadett B, EARLY

Switch panel with switch for blower motor, suitable for all Kadett B up to Chassis-No. 957471
Price per piece, only while stocks last.

32,20 EUR

incl. 19% tax excl. Shipping costs

Switch Panel with Switch for Blower Motor Kadett B, LATE

Switch panel with switch for blower motor, suitable for all Kadett B later than Chassis-No. 957472 up to 1234068.
Price per piece, only while stocks last.

32,20 EUR

incl. 19% tax excl. Shipping costs

Temperature Sensor single polar

Single polar Temperature sensor, wrench size 13, thread size 1/8 27NPT, can be used in the following models:
- Kadett B 1,1 - 1,9
- Kadett C 1,0-2,0E
- Rekord C later than Chassis-No.4587550
- Rekord D 1,7 - 2,0
- Rekord E 1,7 - 2,0
- Ascona / Manta A 1,2 - 1,9
- Ascona / Manta B 1,2 - 2,0
- Commodore A later than Chassis-No. 4587550
- Commodore B
- Commodore C
- Monza A
- Senator A
Price is for one piece

10,00 EUR

incl. 19% tax excl. Shipping costs

1 to 32 (from a total of 44)