Main page » Monza / Senator A » Engine / Clutch

Engine / Clutch

Set of main bearings / crankshaft bearings in standard dimensions, suitable for all CIH engines 2.5 + 2.8 + 3.0.

On request, if necessary, also oversize available at short notice.
Price per set for one engine

166,60 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head 2,5S 1972 UP

Cylinder head 2,5S 1972 UP.
This head fits to mdels later than 1972, WITH the screws in steering housing.
Price is for one piece, only while stock last.
Shipping only possible as bulky or maybe even by truck because weight is more than 31,5kg.

499,00 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head 2,8 S/H 1972 UP

Cylinder head 2,8 S/H 1972 UP.
This head fits to mdels later than 1972, WITH the screws in steering housing.
Can be used in Admiral/Diplomat B, Commodore B, Monza/Senator A later than 1972.
Price is for one piece, only while stock last.
Shipping only possible as bulky or maybe even by truck because weight is more than 31,5kg.

665,00 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head 3,0E

High quality cylinder head gasket from new production, fits to Monza / Senator A 3,0E.
NOT for C30NE-engines.
Price is for one piece, only while stock last.

49,95 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head Gasket 2,0 CIH

Cylinder head gasket for the 2,0E CIH-engines from new production in best quality.
The gasket is 1,0mm thick.
Price is for one piece.

19,95 EUR

incl. 19% tax excl. Shipping costs

Double Pulley Monza/Senator/Rekord/Commodore

*New Old Stock* Pulley on crank shaft, fits to the following models:
- Monza/Senator A 2,0E for Export-models
- Senator/Monza A 2,8H + 3,0H
- Rekord E 2,0E EXPORT later than engine-no. 20E-224897
- Commo C 25S only with Servo-Steering
Price is for one piece, only while stock last.

192,10 EUR

incl. 19% tax excl. Shipping costs

Engine Damper Block Monza/Senator A + Omega A / Senator B

High-quality engine mount block from new production, suitable left + right for the following six-cylinder models
- Monza A, all 6-cylinder models
- Senator A, all 6-cylinder models
- Senator B, all 6-cylinder models
- Omega A, all 6-cylinder models
Price per piece

59,95 EUR

incl. 19% tax excl. Shipping costs

Engine Gasket Set 2,5 + 2,8 later Chassis-No.

Complete engine gasket set for 2.5 + 2.8 S + H engines later Chassis-No, WITH screws in the front of the timing case.
Suitable for the following models:
- Commodore B 2.5 2.8
- Commodore B GS/E if necessary order 1x 850621 additionally, please compare photos
- Commodore C 2,5
- Monza / Senator A 2.5 + 2.8
- Admiral / Diplomat B 2.8S + 2.8H
- Admiral / Diplomat B 2,8E if necessary order 1x 850621 additionally, please compare photos
From new production in good accessory quality, slight reworking may be necessary. These gasket sets are no longer available from Elring / Reinz since 2014 !
Price per set

174,60 EUR

incl. 19% tax excl. Shipping costs

Engine Gasket Set 3,0E

Complete engine gasket set from new production, fits to all Monza / Senator A 3,0E.
Price is per set as seen on photo.

174,60 EUR

incl. 19% tax excl. Shipping costs

Engine Gasket set CIH-6, 2,2 - 3,0 , lower

Gasket set for lower engine in original equipment quality from Reinz, suitable for the following six-cylinder models:
- Rekord C 2.2
- Commodore A, all
- Commodore B, all
- Commodore C, all
- Kapitaen / Admiral A 2.8
- Kapitaen-Admiral-Diplomat B 2.8
- Monza A 2.5 + 2.8 + 3.0
- Senator A 2.5 + 2.8 + 3.0
Price per set as shown, only while stocks last.

119,00 EUR

incl. 19% tax excl. Shipping costs

Engine Mount Monza / Senator A, left

ORIGINAL Engine Mount left / driver side, fits to Commodore C.
Price is for one piece, only while stock last.

35,70 EUR

incl. 19% tax excl. Shipping costs

Engine Oil 20W50

1-Litre bottle engine 20W50 for all modells 1950 up to the 1970ies.
Price is for one 1-litre can.
Price per litre is 10,00€.

10,00 EUR

incl. 19% tax excl. Shipping costs

Frost Plug 20mm

Frost-Plug, diameter 20mm, price is for one piece

2,00 EUR

incl. 19% tax excl. Shipping costs

Frost Plug 24mm

Frost-Plug, diameter 24mm, price is for one piece

2,95 EUR

incl. 19% tax excl. Shipping costs

Frost Plug 26mm

Frost-Plug, diameter 26mm, price is for one piece

2,50 EUR

incl. 19% tax excl. Shipping costs

Frost Plug 34mm

Frost-Plug, diameter 34mm, price is for one piece

2,95 EUR

incl. 19% tax excl. Shipping costs

Frost Plug 34mm

Frost-Plug, diameter 30mm, price is for one piece

3,00 EUR

incl. 19% tax excl. Shipping costs

Frost Plug 35mm

Frost-Plug, diameter 35mm, price is for one piece

2,95 EUR

incl. 19% tax excl. Shipping costs

Fuel stabilizer

Fuel Stabilizer 250ml

13,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Cam Shaft Cover plate CIH front/rear

Gasket cam shaft cover plate front + rear from new production , fits to all CIH-engines 1,5 - 3,0.
Price is for one piece

3,50 EUR

incl. 19% tax excl. Shipping costs

Gasket Cam Shaft Cover plate CIH side

Gasket cam shaft cover plate side from new production , fits to all CIH-engines 1,5 - 3,0.
Price is for one piece

3,50 EUR

incl. 19% tax excl. Shipping costs

Gasket for Valve Cap CIH-4 (1)

High quality valve cover gasket from new production in high quality rubber cork, usable for all CIH-4 cylinders 1.5 - 2.2.
WITH the side guide lugs / wings / prongs, usable for the models with sheet metal cover.
Price per piece.

9,95 EUR

incl. 19% tax excl. Shipping costs

Gasket for Valve Cap CIH-4 (2)

Gasket for Valve Cap all CIH-4-Cylinder models 1,5 - 2,2

5,90 EUR

incl. 19% tax excl. Shipping costs

Gasket for Valve Cap CIH-6

Valve cover gasket from original equipment manufacturer Reinz for all CIH 6-cylinder, suitable for
- Kapitaen A + Admiral A 2.8 with the aluminum valve cover
- Kapitaen-Admiral-Diplomat B 2.8 with the aluminum valve cover
- Commodore A 2.5 + 2.8 with the aluminum valve cover
- Commodore B 2.5 + 2.8 with the aluminum valve cover
- Commodore C 2.5 with the aluminum valve cover
- Monza A 2.5 - 3.0 with the aluminum valve cover
Senator A 2.5 - 3.0 with the aluminum valve cover
Please note: Drill holes are 9mm here, the variant with 7mm drill holes can be found under item no. 607663.
This gasket was used on all models with the aluminum valve cover
Price per piece.

13,90 EUR

incl. 19% tax excl. Shipping costs

Gasket Fuel Pump CIH

Gasket for fuel pump from new production, fits to all CIH-engines 1,5 - 3,0 WITH bakelit-flange.
Price is for one piece.

9,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Oil Pump Cover CIH

Gasket Oel Pump Cover all CIH

3,50 EUR

incl. 19% tax excl. Shipping costs

Gasket Set for Engine lower CIH 1,5 - 2,2

Gasket set for lower engine / crankcase gasket set in very good accessory quality, suitable for the following models:
- Kadett B 1.5 - 1.9
- Kadett C 1.6 - 2.0
- Rekord B 1.5 - 1.9
- Rekord C 1.5 - 1.9
- Rekord D 1.7 - 2.0 + 2.1D
- Rekord E 1.7 - 2.2 + 2.3TD
- Manta / Ascona A 1.6 - 1.9
- Manta / Ascona B 1.6 - 2.4
- Monza / Senator A 2.0 + 2.2 + 2.3TD
- GT 1900
Price per set for one engine.
A different stop screw for the camshaft may have to be used on early models.

44,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Set for Control Housing CIH 1,5 - 3,0

Gasket set for the control housing, consisting of the following parts
- 1x pair of seals for control housing, corresponds to OE 638231-2
- 1x water pump seal, corresponds to OE 1334746
- 1 sealing ring for front control housing, corresponds to 638186

The set is suitable for the following models with gasoline engine:
- Kadett B 1.5 - 1.9
- Kadett C 1.6 - 2.0
- Ascona/Manta A 1.6 + 1.9
- Ascona/Manta B 1.6 - 2.0
- Kapitaen-Admiral A 2.8
- Kapitaen-Admiral-Diplomat B 2.8
- Rekord B 1.5 - 1.9
- Rekord C 1.5 - 2.2
- Rekord D 1.7-2.0
- Rekord E 1.7 - 2.2
- Commodore A 2.5 + 2.8
- Commodore B 2.5 + 2.8
- Commodore C 2.5
- Monza/Senator A 2.0 - 3.0.

Price per set for one engine.

24,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Set for Control Housing CIH 1,5 - 3,0, WITH Screws

Gasket set for the control housing with the matching screws, consisting of the following parts
- 1x pair of seals for control housing, corresponds to OE 638231-2
- 1x water pump seal, corresponds to OE 1334746
- 1x sealing ring for front control housing, corresponds to 638186
- 1x Special screw set for control housing, corresponds to 2018076-S
- 1x special screw set for water pump, corresponds to 2018077-S

The set can be used for the following models with gasoline engine:
- Kadett B 1.5 - 1.9
- Kadett C 1.6 - 2.0
- Ascona/Manta A 1.6 + 1.9
- Ascona/Manta B 1.6 - 2.0
- Captain-Admiral A 2.8
- Captain-Admiral-Diplomat B 2.8
- Record B 1.5 - 1.9
- Record C 1.5 - 2.2
- Record D 1.7-2.0
- Record E 1.7 - 2.2
- Commodore A 2.5 + 2.8
- Commodore B 2.5 + 2.8
- Commodore C 2.5
- Monza/Senator A 2.0 - 3.0.

Price per set for one engine

36,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Set for Cylinder-Head 2,0

High quality Gasket set for cylinder head from new production, fits to the following models:
- Kadett C 2,0E
- Rekord E 2,0E
- Ascona B 2,0E
- Manta B 2,0E
- Monza 2,0E
- Senator A 2,0E.
Price is for one set as pictured.

49,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Set for Engine complete 2,0

Complete Gasket set from new production for Engine 2,0 up to 06-82, can be used in the following models:
- Rekord E 2,0 up to 06-1982
- Kadett C 2,0
- Manta / Ascona B 2,0 up to 06-1982
- Monza/Senator A 2,0 up to 06-1982
Price is for one set.

135,10 EUR

incl. 19% tax excl. Shipping costs