Front Axle / Steering

Front Axle / Steering
Altopelhilfe Artikelbild
2-Spoke Steering Wheel Rekord E
*New old Stock* 2-spoke steering wheel for Rekord E.
Marked: red rubber band for cable fastening
Price per piece, only while stocks last
137,40 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
4-Spoke Sports-Steering Wheel
*New old Stock* 4-spoke sports steering wheel, unfortunately without concrete assignment, so please look at the photos BEFORE buying.
There are 5 (!!) cables coming out of the hub, so we assume that it is intended for export.
Probably suitable for the following models:
- Kadett C
- Ascona B
- Manta B
- Rekord E
Price per piece, only while stocks last.
Please note: the steering wheel has some small traces of storage, therefore at a special price!
129,00 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Ball Ring for Steering Screw
Ball ring for Steering screw , fits to Rekord E + Commodore C.
Price is for one piece, only while stock last .
21,90 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Carrier Joint lower Rekord/Commodore/Monza/Senator
Carrier Joint lower from new production, fits for all models Rekord E, Commodore C, Senator A, Monza A.
Price is for one piece.
19,90 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Carrier Joint lower Rekord/Commodore/Monza/Senator, ORIGINAL
ORIGINAL Carrier Joint lower from new production, fits for all models Rekord E, Commodore C, Senator A, Monza A.
Price is for one piece, only while stock last
38,20 EUR
incl. 19% tax excl. Shipping costs
Damper Bushing for Lower Control Arm Monza/Senator/Commodore/Rekord
Damper Bushing for Lower Control Arm Monza/Senator/Commodore/Rekord
Damper bushing for lower control arm from new production, fits to all models Monza A, Senator A, Rekord E, Commodore C.
Price is for one piece.
11,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Damper Bushing for Steering Lever
Damper Bushing for Steering Lever from new productionfor, diameter 30mm.
Please check the diameter BEFORE your order.
Price is for one piece.
10,00 EUR
incl. 19% tax excl. Shipping costs
Dust Cap Wheel Bearing front
Dust Cap Wheel Bearing front
Grease cap/dust cap for wheel hub/wheel bearing from new production, suitable for all rear-wheel drive vehicles with 4-hole axles and disc brakes from 1962 onwards.

- Rekord A+B, all with 4-hole axles
- Rekord C, all with 4-hole axles
- Rekord D, all with 4-hole axles
- Rekord E, all with 4-hole axles
- Kadett B, all models with front disc brakes ( later than Chassis-No. 1234068)
- Kadett C, all models with front disc brakes
- Manta A, all
- Manta B, all except 400
- Ascona A, all
- Ascona B, all except 400
Price per piece.
1,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Ignition lock Rekord E, Commodore C, Closure Y 1-1000, tilting steering column
Ignition lock, fits to Rekord E / Commodore C for the models with closure Y-1-1000 and tilting steerng column.
Price is for one piece, only while stock last
59,50 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
NEW
Ignition lock Rekord E, Commodore C, R-501-1500
Ignition lock, fits to Rekord E / Commodore C for the models with closure R-501-1500.
Price is for one piece, only while stock last
59,50 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Ignition lock Rekord E, Commodore C, T501-1500
Ignition lock, fits to Rekord E / Commodore C for the models with closure T501-1500.
Price is for one piece, only while stock last
59,50 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
NEW
Ignition lock Rekord E, E-000-999 + F-000-999
Ignition lock, closing at will, can be used in the following models left hand drive: 
- Rekord E 1,7N + 1,9N + 2,0. 
ClosingE-000-999 + F-000-999
Price is for one piece, only while stock last
59,50 EUR
incl. 19% tax excl. Shipping costs
Leveling Clamp 0,75mm
Leveling Clamp 0,75mm
Leveling clamp made of galvanized sheet metal 0,75mm from new production, fits to Rekord A+B+C+D, Commodore A+B ,Kapitaen-Admiral-Diplomat B (only with Servo-steering) .
Price is for one piece
1,50 EUR
incl. 19% tax excl. Shipping costs
Lower Control Arm left Commodore C
Lower Control Arm left Commodore C
ORIGINAL lower control arm left  for boosted wheel suspension ,ready mounted with lower carrier joints ,fits to all Commodore C.
Price is for one piece, only while stock last.
189,00 EUR
incl. 19% tax excl. Shipping costs
Oil Seal Steering Segment Commodore B/C, Rekord D/E, late version
Oil Seal Steering Segment Commodore B/C, Rekord D/E, late version
Oil Seal Steering Segment Commodore B/C, Rekord D/E.
Early version with extra dust lip, please check item 902688, as well.
Price is for one piece, only while stock last.
19,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Oil Seal Wheel Bearing inner later Chass.-No
Oil seal wheel bearing inner from new production, fits to all models Commodore C + Monza A + Senator A later than Chassis-No. F91362918 , Rekord E all models .
Price is for one piece
5,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Rubber Mount Strut Bar Monza/Senator/Commodore/Rekord
Rubber mount for strut bar from new production for all Rekord E, Commodore C, Senator A, Monza A.
Price is for one piece
14,90 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Rubber small for Stabilisator
Rubber small for Stabilisator side on front axle from new production, fits to all models Kapitaen / Admiral / Diplomat A + B, Kadett B + C, Manta B, Ascona B, Monza / Senator A + B, Rekord C + D + E , Commodore A + B + C.
Price is for one piece.
1,50 EUR
incl. 19% tax excl. Shipping costs
Pieces:
 
Altopelhilfe Artikelbild
Shock Absorber Commodore/Rekord/Monza/Senator, front
Shock absorber for front axle from new production, fits to all models Rekord E + Commodore C, Monza A + Senator A.
Price is for one piece, only as pair available.
79,00 EUR
incl. 19% tax excl. Shipping costs
Pieces:
 
Altopelhilfe Artikelbild
Steering kit Monza/Senator A + Rekord E / Commdore C
6-piece steering kit for the front axle from new production, suitable for all Monza A + Senator A as well as Rekord E + Commodore C.
Included in the set:
- 2x outer tie rod end / wheel side, corresponds to OE 324117
- 2x inner tie rod end / gearbox side, corresponds to OE 324118
- 2x rubber bush tension strut, corresponds to 353413

Price per 6-piece set as shown
109,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Steering Knuckle with Suspension Strut Rekord E left
ORIGINAL steering knuckle with suspension strut for the front axle, fits front left / driver's side on all Rekord E models.
Price per piece, only while stocks last.
119,00 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Steering Knuckle with Suspension Strut Rekord E right
ORIGINAL steering knuckle with strut and rod holder for the front axle, fits front right / passenger side on all Rekord E models.
Price per piece, only while stocks last.
119,00 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Steering Lever Intermediate Monza/Senator/Commodore/Rekord
Steering lever intermediate from new production ,fits to all Monza / Senator A, Rekord E, Commodore C with servo steering, complete with bushing.

Price is for one piece.

 

43,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Sway Bar Screw side
Sway Bar Screw for all models Rekord C + E, Commodore A +C , Monza/Senator A1 up to Chassis-No D1003806. 
Price is for one set as on the picture, you need two sets for one car
10,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
Altopelhilfe Artikelbild
Tie Rod End Commodore/Rekord/Monza/Senator
High quality tie rod end outer from new production, fits for all models Rekord E / Commodore C and Monza / Senator A.
Price is for one piece
19,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Wheel Bearing Set Kapitän/Admiral/Diplomat/Commodore, front
Wheel bearing set from new production, fits to all models Kapitaen / Admiral / Diplomat A+B, Commodore A + B. Price is for a set for one side
59,95 EUR
incl. 19% tax excl. Shipping costs
Altopelhilfe Artikelbild
Wheel bolt
Wheel bolt from new production, fits to nearly all models 1953 up.

These wheel bolts have a M12-thread, thread-length 30mm, total length 47mm.
They can be used in the following models:

- Olympia Rekord 1953-57
- Olympia Rekord PI + PII
- Rekord A with discs brakes
- Rekord B
- Rekord C
- Rekord D 
- Commodore A
- Commodore B
- Kadett B with discs brakes
- Kadett C with discs brakes
- Olympia A
- Ascona A
- Ascona B
- Manta A
- Manta B
- Kapitän 1954-57
- Kapitän P
- Kapitän PL rear
- Kapitän A
- Admiral A
- Diplomat A
- Kapitän B
- Admiral B
- Diplomat B


Price is for one piece.
10,95 EUR
incl. 19% tax excl. Shipping costs
1 to 27 (from a total of 27)