Main page » Rekord C / Commodore A » Engine / Clutch

Engine / Clutch

Screw set for cover plate for Oil Pump CIH. Fits to all standard version, NOT for Diesel + boosted pumps.
Price is for one set as pictured.

2,95 EUR

incl. 19% tax excl. Shipping costs

Crank Shaft Bearing CIH

Pilot Bearing Crank Shaft rear CIH 1,5 - 2,8 with manual gear-box.
Good quality from LuK.
Price is for one piece.

13,95 EUR

incl. 19% tax excl. Shipping costs

Crankshaft Bearing Set CIH-4, 0,25

Crankshaft bearing set in 0,25mm oversize , fits to all CIH-engines 1,5 + 1,6 + 1,7 + 1,9 + 2,0.
Price is for one set for one engine, only while stock last.

79,00 EUR

incl. 19% tax excl. Shipping costs

Crankshaft Bearing Set CIH-4, 025mm oversize

Crankshaft bearing set in 0,25mm oversize , fits to all CIH-engines 1,5 - 2,2.
High quality from Glyco.
If you need oversize bearing , just send us a mail.
Price is for one set for one engine

122,60 EUR

incl. 19% tax excl. Shipping costs

Crankshaft Bearing Set CIH-4, Standard

Crankshaft bearing set in standard-size , fits to all CIH-engines 1,5 - 2,2.
High quality from Glyco.
If you need oversize bearing , just send us a mail.
Price is for one set for one engine

122,60 EUR

incl. 19% tax excl. Shipping costs

Crankshaft Bearing Set CIH-6, 0,25 Oversize

Crankshaft bearing set in 0,25mm oversize , fits to all CIH-engines 2,5 + 2,8 + 3,0.
Price is for one set for one engine, only while stock last.

178,50 EUR

incl. 19% tax excl. Shipping costs

Crankshaft Bearing Set CIH-6, Standard

Set of main bearings / crankshaft bearings in standard dimensions, suitable for all CIH engines 2.5 + 2.8 + 3.0.

On request, if necessary, also oversize available at short notice.
Price per set for one engine

166,60 EUR

incl. 19% tax excl. Shipping costs

Cutch Cable Commodore A 2,5S, early engine-no, ORIGINAL

ORIGINAL Clutch cable, fits for the following models:
- Commodore A 2,5S up to engine-no. 25S-54919
Price is for one piece, only while stock last.

38,60 EUR

incl. 19% tax excl. Shipping costs

Cutch Cable Commodore A later engine-no, ORIGINAL

ORIGINAL Clutch cable, fits for the following models:
- Commodore A 2,5S later than engine-no. 25S-54920
- Commodore A GS later than engine-no.25H-12420
- Commodore A GS/E
- Commodore A 2,8E
Price is for one piece, only while stock last.

38,60 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head 1,5 CIH

Cylinder-Head for 1500 CIH, fits to Rekord B 1500, Rekord C 1500, Kadett B 1500, Olympia A 1500.
Price is for one piece, only while stock last

295,00 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head 2,8 S/H up to 1972

Cylinder head 2,8 S/H up to 1972
This head fits to mdels up to 1972, WITHOUT the screws in steering housing.
Can be used in Admiral/Kapitän A, Commodore A.
Price is for one piece, only while stock last.
Shipping only possible as bulky or maybe even by truck because weight is more than 31,5kg.

585,00 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head Commodore A 2,5S

Cylinder head Commodore A 2,5S.
This head fits to mdels till end of 1971, WITHOUT the screws in steering housing.
Can NOT be used for injection models !!
Price is for one piece, only while stock last.
Shipping only possible as bulky or maybe even by truck because weight is more than 31,5kg.

499,00 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head Gasket 1,5 CIH Original

Original-Cylinderhead gasket, fits to Rekord B 1,5, Rekord C 1,5, Kadett B 1,5, Olympia A 1,5.
Price is for one piece, only while stock last.

29,75 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head Gasket 2,5 + 2,8 up to Engine-No.

Cylinder head gasket from new production, fits to Kapitaen-Admiral A 2,8, Kapitaen-Admiral-Diplomat B up to engine-No.( 2,8S-40351, 2,8H-17925, 2,8E-11110 ), Commodore A.
The photo shows the side to the engine, not to the head.
Price is for one piece.

59,95 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head Gasket Set 1,5 CIH

*New Old Stock* - Cylinder head gasket in premium quality from Reinz, fits for 1500 CIH-engines in the following models:
- Rekord B 1,5
- Rekord C 1,5
- Kadett B 1,5
- Olympia A 12,5
Price is for one set as pictured, only while stock last

71,40 EUR

incl. 19% tax excl. Shipping costs

Cylinder Head Gasket Set 1,7 + 1,9 up to Chassis-No.

Cylinder head gasket set from new production in premium quality from Elring/Reinz for 1700 + 1900 CIH-engines up to Chassis-No ( Cylinder Head WITHOUT screws in timing housing ), in Rekord BC, Manta/Ascona A, Kadett B, Olympia A.
Price is for one set.

84,95 EUR

incl. 19% tax excl. Shipping costs

Damper Rubber Transmission Mount side Commodore A, Rekord A/B/C

Damper Rubber for transmission mount side from new production in GM-Quality, fits left or right for all Rekord A/B/C and Commodore A.
Price is for one piece.
Please consider: Sometimes they are not 100% punched, so it can be necessary to cut the thin rubber in the middle for example with a cutter-knife. Very easy job, what anybody will be able to do.

8,90 EUR

incl. 19% tax excl. Shipping costs

Pieces:

Engine Block 1,5S (CIH)

Engine block 1,5S (CIH) up to engine-no. *15S-47981, mounted with pistons, fly-wheel and crankshaft, fits to Rekord BC, Kadett B, Olympia A.
Price is for one piece, only while stock last.
Shipping only possible on a pallet with truck

1.250,00 EUR

incl. 19% tax excl. Shipping costs

Engine Block 1,7S (CIH)

Engine block 1700 (CIH) up to engine-No. *17S-358170*, mounted with pistons and crankshaft, can be used in Rekord BC, Kadett B, Olympia A.
Price is for one piece, only while stock last.
Engine blocks are offered W'ITHOUT guarantee, because the can some surface rust. That does not impair the feature ot the engines.
Shipping only ony a palette and by truck, please ask for individual offer before your order.

1.399,00 EUR

incl. 19% tax excl. Shipping costs

Engine Damper Block Rekord C + Kadett B 1,5 - 1,9

Engine damper block from new production, fits to all models Rekord C + Kadett B 1,5 - 1.,9 .

Fits to both sides .
Price is for one piece.

Please consider:
this mount is fromt the supplier apprived for Commodore A, as well. Can be used, but as the engine is much heavier, the stability is not so long as in in Rekord C.
In our experience it is durable for around 20.000km.
Unfortunately there is no alternative Commodore-specific in the market.

23,90 EUR

incl. 19% tax excl. Shipping costs

Engine Gasket Set 2,5 + 2,8 later Chassis-No.

Complete engine gasket set for 2.5 + 2.8 S + H engines later Chassis-No, WITH screws in the front of the timing case.
Suitable for the following models:
- Commodore B 2.5 2.8
- Commodore B GS/E if necessary order 1x 850621 additionally, please compare photos
- Commodore C 2,5
- Monza / Senator A 2.5 + 2.8
- Admiral / Diplomat B 2.8S + 2.8H
- Admiral / Diplomat B 2,8E if necessary order 1x 850621 additionally, please compare photos
From new production in good accessory quality, slight reworking may be necessary. These gasket sets are no longer available from Elring / Reinz since 2014 !
Price per set

174,60 EUR

incl. 19% tax excl. Shipping costs

Engine Gasket Set 2,5 + 2,8, up to 12-1971

Complete Engine Gasket Set 2,5 + 2,8 engines WITHOUT screws in engine timing housing = up to end of 1971.
Fits to the following models:
- Commodore A 2,5 + 2,8
- Commodore A GS/E item 850621 must be ordered on top.
- Kapitaen / Admiral A 2,8
- Kapitaen / Admiral / Diplomat 2,8S + 2,8H
- Admiral / Diplomat B 2,8E item 850621 must be ordered on top.
- Blitz 1,9to. 2,5L
For injection-models item 850621 must be ordered on top.
Price is for one set as pictured.

174,60 EUR

incl. 19% tax excl. Shipping costs

Engine Mount right Commodore A, Rekord C, Kapitän/Admiral A 2,8

ORIGINAL Engine Mount right / passenger side, fits to the following models:
- Rekord C
- Commodore A
- Kapitaen / Admiral A 2,8
- GT 1900
Price is for one piece, only while stock last.

23,80 EUR

incl. 19% tax excl. Shipping costs

Engine Oil 20W50

1-Litre bottle engine 20W50 for all modells 1950 up to the 1970ies.
Price is for one 1-litre can.
Price per litre is 10,00€.

10,00 EUR

incl. 19% tax excl. Shipping costs

Fanbelt 10 x 900mm

High Quality Fanbelt 10x900mm, can be used in the following models:
- Rekord B 1,5 - 1,9 with AC-generator
- Rekord C 1,5 - 2,2 with AC-generator
- Commodore A 2,2 - 2,8 without Servo
- Rekord D beside Diesel
- Commodore B 2,5 + 2,8
- Rekord E beside Diesel
- Commodore C , Kadett A
- Kadett B 1,1 + 1,2 with DC-generator
- Kadett B 1,5 - 1,9
- Kadett C 1,0 + 1,2
- Ascona / Manta A 1,6 + 1,9
- Ascona / Manta B 1,6 - 2,0 N+S
- Kapitaen-Admiral-Diplomat B 2,8
Price is for one piece

6,90 EUR

incl. 19% tax excl. Shipping costs

Fanbelt for Servo Steering Pump

Fanbelt for Servo Steering Pump 10x875mm from new production ,fits Rekord C/D + Commdore A/B ,Kapitaen-Admiral-Diplomat B 6-Cylinder .
Price is for one piece .

6,90 EUR

incl. 19% tax excl. Shipping costs