Main page » Rekord E / Commodore C » Cooler / Heater

Cooler / Heater

Air funnel at cooler, fits to Rekord E 1,7N + 1.9N + 2,0N/S with automatic transmission.
Price is for one piece, only while stock last.

47,60 EUR

incl. 19% tax excl. Shipping costs

Cap for Cooler

Cap for the cooler, fits to all models BESIDE Diplomat V8.

11,90 EUR

incl. 19% tax excl. Shipping costs

CIH-Water Pump Screws set

Set of screws for water pump, complete with washers, fits to all models CIH 1,5 - 2,8, price is for one set

5,95 EUR

incl. 19% tax excl. Shipping costs

Cooler Cleaner

250ml bottle cooler cleaner

11,95 EUR

incl. 19% tax excl. Shipping costs

Cooling Liquid Temperature Sensor

Cooling Liquid Temperature Sensor ´BLUE´, fits for Kadett C 2,0E , Ascona/Manta B 2,E , Rekord E 2,0E , Commodore C 2,5E , Senator/Monza A 2,5E + 3,0 .Price is for one piece

12,90 EUR

incl. 19% tax excl. Shipping costs

Cooling Thermostat CIH 1,5-3,0 ´Carburator` 1957 up

Cooling thermostat from new production, opens at 88 degrees Celsius, fits all carburator-engines 1,5 - 3,0 and Rekord PI, PII, Kapitaen P.
Does NOT fit to injection-models, Diesel and all models with air condition.
Price is for one set incl the pictured gaskets.

15,90 EUR

incl. 19% tax excl. Shipping costs

Cooling Thermostat Installation Kit, " three Screws"

Coolant thermostat installation kit, opening start 88° Celsius, suitable for all CIH carburetor engines 1.5 - 3.0.
PLEASE NOTE: This version is for models where the thermostat housing is attached to the cylinder head with THREE screws!
NOT suitable for injection, diesel and all models with air conditioning.
Price per set incl. the gaskets shown.

17,95 EUR

incl. 19% tax excl. Shipping costs

Cover Air Baffle right lower Commodore C

Cover for air baffle, right side / passenger side bottom, suitable for Commodore C.
Price per piece, only while stocks last.

12,50 EUR

incl. 19% tax excl. Shipping costs

Expansion Tank Rekord E, Commo C, Monza A, Senator A

ORIGINAL Expansion tank for cooling fluid.
This NOS expansion tank fits to the following models:

Rekord E 17N,18N/S,19N,20NS only high performance cooler
Commodore C 25S
Senator/Monza A 2,8H + 3,0S
Senator/Monza A 30E up to Chassis-No 11045381
Price is for one piece, only while stock last.

58,60 EUR

incl. 19% tax excl. Shipping costs

Fanbelt 10 x 900mm

High Quality Fanbelt 10x900mm, can be used in the following models:
- Rekord B 1,5 - 1,9 with AC-generator
- Rekord C 1,5 - 2,2 with AC-generator
- Commodore A 2,2 - 2,8 without Servo
- Rekord D beside Diesel
- Commodore B 2,5 + 2,8
- Rekord E beside Diesel
- Commodore C , Kadett A
- Kadett B 1,1 + 1,2 with DC-generator
- Kadett B 1,5 - 1,9
- Kadett C 1,0 + 1,2
- Ascona / Manta A 1,6 + 1,9
- Ascona / Manta B 1,6 - 2,0 N+S
- Kapitaen-Admiral-Diplomat B 2,8
Price is for one piece

6,90 EUR

incl. 19% tax excl. Shipping costs

Front panel upper Rekord E1 with high-performance cooler

Upper Front, fits for Rekord E1 1,7 + 1,9 + 2,0N/S up to Chassis-No. D1000028 with high-performance watercooler.
Price is for one piece, only while stock last.
Shipping only as bulky good, please ask for your individual shipping conditions before your order.

160,00 EUR

incl. 19% tax excl. Shipping costs

Frost Protection Fluid , 1500ml

1500ml Frost Protection Fluid (blue).
Price is for one 1500ml-Bottle.

7,95 EUR

incl. 19% tax excl. Shipping costs

Gasket Thermostat Housing Cover CIH 1,5 - 3,0

Gasket Thermostat Housing Cover CIH 1,5 - 3,0 beside Injection

1,50 EUR

incl. 19% tax excl. Shipping costs

Gasket Thermostat-Housing 2,5E + 3,0E

Gasket for thermostat housing to Cylinderhead from new production , fits for Monza / Senator A 2,5E + 3,0E and Commodore C 2,5E.
Price is for one piece .

1,60 EUR

incl. 19% tax excl. Shipping costs

Gasket Thermostat-Housing CIH

Gasket for thermostat housing to Cylinderhead for CIH 1,5 - 2,8 with Carburator-Engine and two screws .
Price is for one piece .

2,00 EUR

incl. 19% tax excl. Shipping costs

Gasket Thermostat-Housing CIH THREE screws

Gasket for thermostat housing to Cylinderhead for CIH 1,5 - 2,8 with Carburator-Engine and three screws .
Price is for one piece .

2,00 EUR

incl. 19% tax excl. Shipping costs

Gasket Water Pump CIH 1,5 - 3,0

High quality gasket for Water pump all CIH 1,5 - 3,0 .
Price is for one piece .

5,95 EUR

incl. 19% tax excl. Shipping costs

Grommet for Radiator Grill as 3-parts set

Grommet for Radiator Grill from new production in GM-quality, fits to following models:
- Ascona / Manta A
- Ascona / Manta B
- Kadett C
- Commodore B / Rekord D
- Commodore C / Rekord E
- Monza A / Senator A.
Price is for a 3-parts-set, only as set available.

7,95 EUR

incl. 19% tax excl. Shipping costs

Heater Hose per metre

Exclusive for us produced water hose for heater, can be used in all models.
Of course the hose has a fabric lining.
Inner dieamtre ca. 15mm, outer ca. 22mm.
Price is for one metre

9,95 EUR

incl. 19% tax excl. Shipping costs

High Performance Fan Blade CIH

7-blade high-performance fan wheel / wind vane from new production, suitable for all OPEL CIH engines 1.5 - 2.8, for all vehicles with a fixed fan (NOT for viscous fans). The fan wheel is fastened here with 4 screws, NOT with a central screw or nut.
Price per piece.
PLEASE READ the following instructions:
- This fan wheel is suitable for OPEL CIH engines 1.5 - 2.8, for all vehicles with a fixed fan (NOT for viscous fans). The fan wheel is fastened here with 4 screws, NOT with a central screw or nut.
ONLY for CIH engines , NOT suitable for Diesel + OHC engines + OHV engines and models with power steering.
>> Diameter approx. 350mm , central bore to water pump approx. 24mm <<

On 6-cylinder models, the plastic frame on the radiator may have to be cut out slightly.

If the generator-tensioner from the 6-cylinder is used on the 4-cylinder, although original is always preached, then this fan wheel does not fit!!!

39,95 EUR

incl. 19% tax excl. Shipping costs

Ignition Kit 2,5 - 2,8 (BOSCH-3)

High-quality ignition set for CIH-6 models with Bosch ignition system, early version up to approx. 1969.
Price per set as shown.

Please read the complete explanation BEFORE placing your order:

Please check which distributor cap you need BEFORE placing your order.

Item 1212138 = groove as guide
Item 1212145 = pin/cam as guide

Please see photos

Included in the set:

1x distributor rotor
1x ignition contact
1x 7-piece ignition cable set
6x BOSCH spark plugs
1x Beru distributor cap for BOSCH system = the distributor cap has an outer diameter of approx. 75 mm and a pin as a guide = item 1212145

The set can be used with the following models with the distributor cap described above:

- Kapitän-Admiral A 2.8
- Kapitaen-Admiral-Diplomat B 2.8
- Commodore A 2.5 + 2.8
- Blitz 1.9 to 2.5L

The following models MAY also have a corresponding distributor installed if the distributor was replaced at an earlier date:

- Commodore B 2.5 + 2.8
- Commodore C 2.5
- Monza A 2.5 + 2.8
- Senator A 2.5 + 2.8

98,50 EUR

incl. 19% tax excl. Shipping costs

Lamella for Mix Air Jet Housing Commodore C, Rekord E

Rotable lamella Mix Air Jet Housing, fits to Commodore C + Rekord E.
Price is for one piece, only while stock last.

17,60 EUR

incl. 19% tax excl. Shipping costs

Mix Air Jet Housing , early version

Mix Air Jet Housing Outer , late version, fits to Rekord E + Commodore C up to Chassis-No. C 1000868.
Price is for one piece , only while stock last .

28,75 EUR

incl. 19% tax excl. Shipping costs

Pulley on Water Pump 2,5S + 2,8H + 3,0H

Pulley, suitable for the following models:
- Monza / Senator A 3.0H, manual transmission
- Monza / Senator A 2.8H, manual transmission
- Monza / Senator A 2.8H Switzerland (manual transmission) later than Chassis-no. 911141836 to engine no. 28H-87166, 3.0H-2824, from 28H-85709 to 28H91802
- Commodore C 25S manual transmission up to engine no. 25S-209048, automatic transmission up to 25S-215626
Price per item, only while stocks last

87,60 EUR

incl. 19% tax excl. Shipping costs

Pulley on Water Pump CIH 1,5 - 2,8, with fixed fan

ALUMINIUM pulley from new production for the standard CIH water pump, suitable for the following models with water pump with fixed fan.
- Rekord B 1.5 - 1.9
- Rekord C 1.5 - 2.2
- Rekord D 1.7-2.0N/S
- Rekord E 1.7-2.0N/S
- Kadett B 1.5 - 1.9
- Kadett C 1.6S
- Ascona / Manta 1.6 + 1.9S
- Ascona / Manta B 1.6 - 2.0N/S
- GT 1900
The pulley can generally be used on all models that have our 1334035 water pump installed or where the fixed fan is fastened with 4 M8 screws.
Price per piece

69,95 EUR

incl. 19% tax excl. Shipping costs

Rotary Switch for Air Condition + ventilation Rekord E1 , Commodore C, 3 pole

3-pole Rotary Switch for Air Condition + ventilation for Rekord E1 , Commodore C.
Price is for one piece, only while stock last.

107,10 EUR

incl. 19% tax excl. Shipping costs

Rotary Switch for Air Condition + ventilation Rekord E1 , Commodore C, 4 pole

4-pole Rotary Switch for Air Condition + ventilation for Rekord E1 , Commodore C.
Price is for one piece, only while stock last.

95,20 EUR

incl. 19% tax excl. Shipping costs

Rubber Bumper Cooler side

Rubber bumper side for cooler in frontpanel from new prooduction , , fits to Rekord E , Commodore C , Monza A and Senator A (beside Comprex-Diesel) .
Price is for one piece .

3,50 EUR

incl. 19% tax excl. Shipping costs

Pieces:

Rubber Seal under Thermostat CIH 1,7 - 2,8

Rubber seak under thermostat all CIH 1,7 - 2,8

2,00 EUR

incl. 19% tax excl. Shipping costs

Screw Set Pulley on Water Pump CIH 1,5 - 2,8, with fixed fan

Screw set / fastening set for belt pulley on standard CIH water pump, suitable for the following models with water pump with fixed fan.
- Rekord B 1.5 - 1.9
- Rekord C 1.5 - 2.2
- Rekord D 1.7-2.0N/S
- Rekord E 1.7-2.0N/S
- Kadett B 1.5 - 1.9
- Kadett C 1.6S
- Ascona / Manta 1.6 + 1.9S
- Ascona / Manta B 1.6 - 2.0N/S
- GT 1900
The pulley screw set can be used on all models that have our 1334035 water pump installed or where the fixed fan is fastened with 4 M8 screws.
Price per set as shown.

2,95 EUR

incl. 19% tax excl. Shipping costs

Symbol Strap Heater Pursuit Commodore/Rekord/Monza/Senator

Symbol Strap Heater Pursuit for Commodore C + Rekord E later than Chassis-No. 11041894, /Monza / Senator A later than 11165365.
Price is for one piece, only while stock last

8,33 EUR

incl. 19% tax excl. Shipping costs

Temperature Sensor single polar

Single polar Temperature sensor, wrench size 13, thread size 1/8 27NPT, can be used in the following models:
- Kadett B 1,1 - 1,9
- Kadett C 1,0-2,0E
- Rekord C later than Chassis-No.4587550
- Rekord D 1,7 - 2,0
- Rekord E 1,7 - 2,0
- Ascona / Manta A 1,2 - 1,9
- Ascona / Manta B 1,2 - 2,0
- Commodore A later than Chassis-No. 4587550
- Commodore B
- Commodore C
- Monza A
- Senator A
Price is for one piece

10,00 EUR

incl. 19% tax excl. Shipping costs

1 to 32 (from a total of 61)